← Wallman Synthetic Matt Enamel In the print window, choose “Save as PDF”.
Technical Data Sheet TDS-WM-SME · Rev 01 · October 2026

Wallman · Interior walls

Synthetic Matt Enamel

A smooth, washable matt enamel for interior walls.

  • Smooth Matt Finish
  • 47 shades
  • Solvent based
Wallman Synthetic Matt Enamel
  • Coverage12 – 14 m²/L
  • Touch dry1 – 2 hours
  • Recoat12 – 16 hours
  • Coats2
  • ThinningMineral turpentine
  • FinishSmooth matt

01Product description

Wallman Synthetic Matt Enamel is an alkyd-based enamel that dries to a smooth, elegant matt finish with the toughness of an oil paint. Its hard-wearing film resists stains, damp and steam, and wipes clean without polishing, so walls keep their even, non-reflective look for years. Use it on interior walls and ceilings, kitchens, bathrooms and corridors, and on doors, windows and woodwork for a matching matt finish throughout the home.

Recommended for

  • Interior walls
  • Kitchens
  • Bathrooms
  • Corridors
  • Doors and woodwork

02Key features

  • Smooth, non-reflective matt finish
  • Washable – wipes clean without polishing
  • Hard-wearing alkyd film
  • Resists damp, steam and fungus
  • Excellent hiding and flow
  • For walls, wood and metal

03Performance

Drying time at 25°C

30 min1 h4 h1 day7 daysTouch dry1 – 2 hoursHard dry12 hoursRecoat12 – 16 hoursFull cure7 days

Sheen level

Below 8 GU
  1. Matt
  2. Low sheen
  3. Silk
  4. Semi-gloss
  5. Gloss

Apply with

  • Brush
  • Roller
  • Spray
PACS Premium Asian Coating Systems
Karachi, Pakistan
ISO 9001:2015
quality-managed production
pacsofficial.com
TDS-WM-SME · Rev 01 · October 202601 / 03
Technical data & application Synthetic Matt Enamel
Technical Data Sheet
TDS-WM-SME
Scan for latest version

04Technical data

Product typeAlkyd synthetic matt enamel
FinishSmooth matt
Gloss (60°)Below 8 GU
Volume solids46 ± 2%
Specific gravity1.35 – 1.45 kg/L (shade dependent)
Dry film thickness30 – 35 µm per coat
Theoretical coverage12 – 14 m²/L per coat (129 – 151 sq ft)
Touch dry1 – 2 hours
Hard dry12 hours
Recoat12 – 16 hours
Full cure7 days
ThinnerMineral turpentine, up to 10%
ApplicationBrush, roller, spray
Recommended coats2
Shelf life24 months, unopened

Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.

05How to apply

Surface preparation

  1. Surface must be clean, dry and sound, free of dust, grease, loose paint and efflorescence.
  2. New plaster should cure for at least 28 days before painting.
  3. Fill cracks and dents with Wallman Premium Wall Putty, allow to dry and sand smooth.
  4. Apply one coat of Wallman Synthetic Wall Primer Sealer and let it dry overnight.
  5. On old painted walls, wash off dirt and grease and lightly sand glossy areas for good adhesion.

Application

  1. Stir thoroughly before use.
  2. Thin with mineral turpentine only if needed, up to 10%.
  3. Apply thin, even coats by brush, roller or spray.
  4. Allow 12 – 16 hours between coats.
  5. Keep the room ventilated while painting and drying.
  6. Clean tools with mineral turpentine.

06Storage, health & safety

  • Flammable — no naked flames
  • Ventilate well while painting
  • Avoid skin contact
  • Keep away from children

Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.

The information in this data sheet is given in good faith, based on laboratory testing and practical experience. As conditions of use are beyond our control, no warranty is implied as to results. Premium Asian Coating Systems reserves the right to change this information without notice; please check that you have the latest issue.

PACS Premium Asian Coating Systems
Karachi, Pakistan
ISO 9001:2015
quality-managed production
pacsofficial.com
TDS-WM-SME · Rev 01 · October 202602 / 03
Shade card Synthetic Matt Enamel
Technical Data Sheet
TDS-WM-SME
Scan for latest version

07Shade card

47 ready-mixed shades of Wallman Synthetic Matt Enamel.

  1. Apple White 4001
  2. Off White 4002
  3. Chandni 4003
  4. Onion 4004
  5. Cameo 4005
  6. Badami 4006
  7. Sand Touch 4007
  8. Gold 4008
  9. Yellow 4009
  10. Light Orange 4010
  11. Kitten White 4011
  12. Peach 4012
  13. Rose White 4013
  14. Zeneta 4014
  15. Polish Brown 4015
  16. Beige White 4016
  17. Paprika 4017
  18. Chilli Red 4018
  19. Snowfield 4019
  20. Ash White 4020
  21. Lavender White 4021
  22. Steel Grey 4022
  23. Torres Blue 4023
  24. Blue Classic 4024
  25. Cool Blue 4025
  26. Sweet Blue 4026
  27. Ocean Dip 4027
  28. Reflection 4028
  29. Grape 4029
  30. Onyx 4030
  31. Soft Green 4031
  32. Lime Green 4032
  33. Moon Light 4033
  34. Moon Flower 4034
  35. Pink 4035
  36. Classic 4036
  37. Layric Pink 4037
  38. Lilac 4038
  39. Violet Touch 4039
  40. Carnival Pink 4040
  41. Jet Black 4041
  42. New Ash White 4042
  43. Woven White 4043
  44. Terrace Stone 4044
  45. Snow Bell 4045
  46. Foggy 4046
  47. Brilliant White

Printed and on-screen colours are a guide only and may differ from the dried paint film. Always check the physical shade card or a sample patch before buying. Other colours can be matched on request through your dealer.