Wallman · Putty & primers
Synthetic Wall Primer Sealer
Oil-based sealer that locks out alkali, damp and stains.
- Coverage10 – 12 m²/L
- Touch dry1 – 2 hours
- Coats1
- ThinningMineral turpentine
- FinishFlat
- Shelf life24 months, unopened
01Product description
Wallman Synthetic Wall Primer Sealer is a solvent-based alkyd sealer that soaks into plaster and cement and binds it into a hard, sealed base. It blocks alkali from new cement and helps stop water marks, smoke and old stains from showing through, so emulsions and enamels dry to an even, long-lasting colour. Use it on new or patchy walls, inside and out — especially under Wallman Synthetic Matt Enamel and Weather Defence.
Recommended for
- New plaster
- Cement and patchy or stained walls — interior & exterior
02Key features
- Deep-penetrating alkyd sealer
- Blocks alkali from new cement
- Helps stop stains and water marks showing through
- Excellent adhesion for emulsions and enamels
- Hard, even base that saves topcoat
- For interior and exterior walls
03Performance
Drying time at 25°C
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
TDS-WM-SWPS
Scan for latest version
04Technical data
| Product type | Alkyd (synthetic) wall primer sealer |
|---|---|
| Finish | Flat |
| Colour | White |
| Volume solids | 35 ± 2% |
| Specific gravity | 1.20 – 1.30 kg/L |
| Theoretical coverage | 10 – 12 m²/L per coat (108 – 130 sq ft) |
| Touch dry | 1 – 2 hours |
| Topcoat after | 8 – 12 hours (overnight recommended) |
| Thinner | Mineral turpentine, 10 – 20% |
| Application | Brush, roller, spray |
| Recommended coats | 1 (2 on very porous or stained walls) |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
05How to apply
Surface preparation
- Surface must be completely dry, clean and sound, free of dust, grease, loose paint and efflorescence.
- New plaster should cure for at least 28 days before sealing.
- Fill cracks and dents with Wallman Premium Wall Putty, allow to dry and sand smooth.
- Brush off all sanding dust.
- Treat fungus or algae and let the wall dry fully before sealing.
- Do not apply on damp walls — fix the source of seepage first.
Application
- Stir thoroughly before use.
- Thin with mineral turpentine, 10 – 20%, according to surface porosity.
- Apply one even coat by brush, roller or spray; two coats on very porous or stained walls.
- Allow 8 – 12 hours, preferably overnight, before the topcoat.
- Finish with Wallman emulsions, Weather Defence or Synthetic Matt Enamel.
- Keep the area ventilated while painting and clean tools with mineral turpentine.
06Storage, health & safety
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information in this data sheet is given in good faith, based on laboratory testing and practical experience. As conditions of use are beyond our control, no warranty is implied as to results. Premium Asian Coating Systems reserves the right to change this information without notice; please check that you have the latest issue.