Whale · Wood & metal
High Gloss Synthetic Enamel
Tough high-gloss enamel for wood and metal, inside and out.
- Coverage13 – 15 m²/L
- Touch dry2 – 3 hours
- Recoat16 – 24 hours
- Coats2
- ThinningMineral turpentine
- FinishHigh gloss
01Product description
Whale High Gloss Synthetic Enamel gives wood and metal a smooth, glossy, hard-wearing finish with good hiding. Easy to apply and suitable for interior and exterior use.
Recommended for
- Doors
- Windows
- Grills
- Gates
- Furniture
02Key features
- High gloss finish
- Ultra hiding properties
- Easy to apply
- Good whiteness and coverage
- Interior and exterior
03Performance
Drying time at 25°C
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
TDS-WH-HGSE
Scan for latest version
04Technical data
| Product type | Alkyd synthetic enamel |
|---|---|
| Finish | High gloss |
| Gloss (60°) | Above 80 GU |
| Volume solids | 42 ± 2% |
| Specific gravity | 1.05 – 1.20 kg/L (shade dependent) |
| Dry film thickness | 30 µm per coat |
| Theoretical coverage | 13 – 15 m²/L per coat (140 – 161 sq ft) |
| Touch dry | 2 – 3 hours |
| Recoat | 16 – 24 hours |
| Thinner | Mineral turpentine, up to 10% |
| Application | Brush, roller, spray |
| Recommended coats | 2 |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
05How to apply
Surface preparation
- Remove rust, mill scale and loose paint by wire brushing or sanding.
- Wipe off grease and oil with solvent.
- Prime bare metal with Red Oxide Primer; prime or undercoat bare wood.
- Lightly sand previously painted glossy surfaces for adhesion.
Application
- Stir thoroughly before use.
- Thin with mineral turpentine only if needed.
- Apply thin, even coats by brush, roller or spray.
- Allow the recommended recoat time between coats.
- Clean tools with mineral turpentine.
06Storage, health & safety
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information in this data sheet is given in good faith, based on laboratory testing and practical experience. As conditions of use are beyond our control, no warranty is implied as to results. Premium Asian Coating Systems reserves the right to change this information without notice; please check that you have the latest issue.
TDS-WH-HGSE
Scan for latest version
07Shade card
39 ready-mixed shades of Whale High Gloss Synthetic Enamel.
- Off White 7001
- Kitten White 7002
- Cameo 7003
- Early Dawn 7004
- Pink 7005
- Peach 7006
- Diyar 7007
- Golden Brown 7008
- Beige 7009
- Terracotta 7010
- Polish Brown 7011
- Red Oxide 7012
- Coriander 7013
- Coffee Brown 7014
- Golden Yellow 7015
- Leather Brown 7016
- Signal Red 7017
- Soft Blue 7018
- Brown 7019
- Comet Blue 7020
- Light Blue 7021
- Mid Blue 7022
- Ash White 7023
- Lavender White 7024
- Pumice 7025
- Shadow 7026
- Court Grey 7027
- Smoke Grey 7028
- Crayon Green 7029
- Sea Green 7030
- Lime Green 7031
- Fishery Green 7032
- Royal Green 7033
- Baby Pink 7034
- Purple 7035
- Orange 7036
- County Cream 7037
- Black 7038
- White
Printed and on-screen colours are a guide only and may differ from the dried paint film. Always check the physical shade card or a sample patch before buying. Other colours can be matched on request through your dealer.