Whale
Smooth Wall Putty
Smooth flat
Details
Wall Primer Sealer
Stain-blocking sealer with excellent adhesion.
- Coverage10 – 12 m²/L
- Touch dry1 – 2 hours
- Recoat8 – 12 hours
- Coats1
Overview
Made for putty & primers.
Whale Wall Primer Sealer gives excellent adhesion and stain blocking on a wide variety of surfaces, inside and out. It seals alkaline and patchy walls so emulsions and enamels dry to an even, long-lasting finish.
- Interior & exterior walls
- Patchy or stained surfaces
Key features
- Excellent adhesion
- Stain and alkali blocking
- For a variety of surfaces
- Excellent coverage
- Fast drying
Performance
How it performs.
Drying time at 25°C
Coverage per coat
10–12m²/L
≈ 108–129 sq ft per litre
| Drum 18.2 L | 182–218 m² |
|---|---|
| Gallon 3.64 L | 36–44 m² |
| Quarter 0.91 L | 9–11 m² |
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
Recommended system · Walls · oil-based enamels
- 1Whale Smooth Wall PuttyLevel the surface
- 2Whale Wall Primer SealerSeal and bind
- 3
Whale Eggshell Matt Enamel × 2Washable enamel finish
Technical data
The specifications.
| Product type | Alkyd wall primer sealer |
|---|---|
| Finish | Flat |
| Volume solids | 35 ± 2% |
| Specific gravity | 1.20 ± 0.05 kg/L |
| Theoretical coverage | 10 – 12 m²/L (108 – 130 sq ft) |
| Touch dry | 1 – 2 hours |
| Recoat | 8 – 12 hours |
| Thinner | Mineral turpentine, 10 – 20% |
| Application | Brush, roller, spray |
| Recommended coats | 1 |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
Download
The full technical data sheet as a print-ready A4 PDF — specifications, application, system and shade card.
Open datasheetPack sizes
Drum · Gallon · Quarter
How to apply
For the best finish.
1 · Prepare the surface
- Surface must be clean, dry, sound and free of dust, grease, loose paint and efflorescence.
- New plaster should cure for at least 28 days before painting.
- Fill cracks and dents with Wall Putty, allow to dry and sand smooth.
- Apply one coat of a suitable primer on new or porous surfaces.
2 · Apply
- Stir well.
- Thin with mineral turpentine as needed.
- Apply one even coat.
- Allow 8 – 12 hours before the topcoat.
- Clean tools with mineral turpentine.
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information on this page is given in good faith based on our testing and experience. As conditions of use are beyond our control, no warranty is implied. Premium Asian Coating Systems reserves the right to update this information without notice.