Iron Wall · Wood & metal
High Gloss Enamel
High-gloss enamel with 360° moisture and stain protection.
- Coverage14 – 16 m²/L
- Touch dry2 hours
- Recoat16 – 24 hours
- Coats2
- ThinningMineral turpentine
- FinishHigh gloss
01Product description
Iron Wall High Gloss Enamel is a premium enamel with “360 Protection” — excellent hiding and coverage, superior gloss and durability, and a waterproof, moisture- and stain-resistant film that keeps colour vivid for years.
Recommended for
- Doors
- Windows
- Grills
- Gates
- Kitchen and bathroom woodwork
02Key features
- Excellent hiding and coverage
- Superior gloss and durability
- Waterproof, moisture- and stain-resistant
- Long-lasting colour
03Performance
Drying time at 25°C
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
TDS-IW-HGE
Scan for latest version
04Technical data
| Product type | Modified alkyd high-gloss enamel |
|---|---|
| Finish | High gloss |
| Gloss (60°) | Above 90 GU |
| Volume solids | 46 ± 2% |
| Specific gravity | 1.05 – 1.20 kg/L (shade dependent) |
| Dry film thickness | 30 – 35 µm per coat |
| Theoretical coverage | 14 – 16 m²/L per coat (150 – 172 sq ft) |
| Touch dry | 2 hours |
| Hard dry | 16 hours |
| Recoat | 16 – 24 hours |
| Thinner | Mineral turpentine, up to 10% |
| Application | Brush, roller, spray |
| Recommended coats | 2 |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
05How to apply
Surface preparation
- Remove rust, mill scale and loose paint by wire brushing or sanding.
- Wipe off grease and oil with solvent.
- Prime bare metal with Red Oxide Primer; prime or undercoat bare wood.
- Lightly sand previously painted glossy surfaces for adhesion.
Application
- Stir thoroughly before use.
- Thin with mineral turpentine only if needed.
- Apply thin, even coats by brush, roller or spray.
- Allow the recommended recoat time between coats.
- Clean tools with mineral turpentine.
06Storage, health & safety
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information in this data sheet is given in good faith, based on laboratory testing and practical experience. As conditions of use are beyond our control, no warranty is implied as to results. Premium Asian Coating Systems reserves the right to change this information without notice; please check that you have the latest issue.
TDS-IW-HGE
Scan for latest version
07Shade card
40 ready-mixed shades of Iron Wall High Gloss Enamel.
- Ash White 011
- Light Grey 012
- Smoke Grey 022
- Dark Grey 023
- Royal Blue 026
- Grey White 041
- Sky Blue 018
- Light Blue 025
- Wild Blue 036
- Middle Blue 026
- Bright Grey 037
- Lilac 028
- Violet 024
- Orange 006
- Royal Green 017
- Light Green 039
- Sea Green 014
- Spring Green 015
- Adams Green 013
- Emerald 016
- Antique White 001
- Cockleshell 008
- Sand Stone 005
- Cameo 014
- Peach 046
- County Cream 002
- Cream 003
- Lemon 004
- Golden Yellow 005
- Diyar 029
- Beige 009
- Beige Brown 010
- Terracotta 031
- Polish Brown 032
- Sharp Brown 040
- Pink 007
- Shoking Pink 038
- Hot Pink 033
- Signal Red 008
- Red Oxide 020
Printed and on-screen colours are a guide only and may differ from the dried paint film. Always check the physical shade card or a sample patch before buying. Other colours can be matched on request through your dealer.