Wallman
Premium Red Oxide Primer
Anti-rust metal primer
Details
High Gloss Enamel
High-gloss enamel with 360° moisture and stain protection.
- Coverage14 – 16 m²/L
- Touch dry2 hours
- Recoat16 – 24 hours
- Coats2
Overview
Made for wood & metal.
Iron Wall High Gloss Enamel is a premium enamel with “360 Protection” — excellent hiding and coverage, superior gloss and durability, and a waterproof, moisture- and stain-resistant film that keeps colour vivid for years.
- Doors
- Windows
- Grills
- Gates
- Kitchen and bathroom woodwork
Key features
- Excellent hiding and coverage
- Superior gloss and durability
- Waterproof, moisture- and stain-resistant
- Long-lasting colour
Performance
How it performs.
Drying time at 25°C
Coverage per coat
14–16m²/L
≈ 151–172 sq ft per litre
| Gallon 3.64 L | 51–58 m² |
|---|---|
| Quarter 0.91 L | 13–15 m² |
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
Recommended system · Metal gates & grills
- 1Wallman Premium Red Oxide PrimerRust protection for metal
- 2Iron Wall High Gloss Enamel × 2Colour and protection
Shade card
40 ready-mixed shades.
Ash White
Shade 011
Screen colours are a guide. Check the printed shade card at your dealer before buying.
Technical data
The specifications.
| Product type | Modified alkyd high-gloss enamel |
|---|---|
| Finish | High gloss |
| Gloss (60°) | Above 90 GU |
| Volume solids | 46 ± 2% |
| Specific gravity | 1.05 – 1.20 kg/L (shade dependent) |
| Dry film thickness | 30 – 35 µm per coat |
| Theoretical coverage | 14 – 16 m²/L per coat (150 – 172 sq ft) |
| Touch dry | 2 hours |
| Hard dry | 16 hours |
| Recoat | 16 – 24 hours |
| Thinner | Mineral turpentine, up to 10% |
| Application | Brush, roller, spray |
| Recommended coats | 2 |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
Download
The full technical data sheet as a print-ready A4 PDF — specifications, application, system and shade card.
Open datasheetPack sizes
Gallon · Quarter
How to apply
For the best finish.
1 · Prepare the surface
- Remove rust, mill scale and loose paint by wire brushing or sanding.
- Wipe off grease and oil with solvent.
- Prime bare metal with Red Oxide Primer; prime or undercoat bare wood.
- Lightly sand previously painted glossy surfaces for adhesion.
2 · Apply
- Stir thoroughly before use.
- Thin with mineral turpentine only if needed.
- Apply thin, even coats by brush, roller or spray.
- Allow the recommended recoat time between coats.
- Clean tools with mineral turpentine.
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information on this page is given in good faith based on our testing and experience. As conditions of use are beyond our control, no warranty is implied. Premium Asian Coating Systems reserves the right to update this information without notice.
