PACS Specialty
SBR Waterproof
Bonding & waterproofing
Details
PACS Specialty
Urban Glaze
U3-technology sealant that waterproofs, hardens and heat-guards.
- Coverage6 – 8 m²/L
- Touch dry1 hour
- Recoat4 hours
- Coats2
Overview
Made for waterproofing.
Wallman Urban Glaze is a clear protective waterproofing sealant built on U3 technology. It penetrates and seals mineral surfaces, adding water-proofing, chemical resistance, heat guard from sun rays and surface hardness, with anti-fungal and anti-bacterial protection.
- Roofs
- Terraces
- Exterior walls
- Concrete and cement floors
Key features
- Waterproof sealant
- Heat guard from sun rays
- Chemical resistance
- Increases surface hardness and toughness
- Anti-fungal and anti-bacterial protection
Performance
How it performs.
Drying time at 25°C
Coverage per coat
6–8m²/L
≈ 65–86 sq ft per litre
| 1 Litre 1 L | 6–8 m² |
|---|
Apply with
- Brush
- Roller
- Spray
Recommended system · Roof & terrace
- 1PACS Specialty SBR WaterproofRepairs cracks and waterproofs the cement
- 2PACS Specialty Urban Glaze × 2Clear waterproof, heat-guard sealant
Technical data
The specifications.
| Product type | Clear waterproofing sealant (U3 technology) |
|---|---|
| Appearance | Clear to milky liquid, dries transparent |
| Specific gravity | 1.00 – 1.05 kg/L |
| Theoretical coverage | 6 – 8 m²/L per coat, surface dependent |
| Touch dry | 1 hour |
| Recoat | 4 hours |
| Full cure | 7 days |
| Thinning | Ready to use |
| Application | Roller, brush, low-pressure spray |
| Recommended coats | 2 |
| Shelf life | 12 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
Download
The full technical data sheet as a print-ready A4 PDF — specifications, application, system and shade card.
Open datasheetPack sizes
1 L and larger packs
How to apply
For the best finish.
1 · Prepare the surface
- Surface must be clean, dry, sound and free of dust, moss, oil and loose material.
- Repair cracks and holes with SBR Waterproof cement slurry and allow to cure.
- New concrete or plaster should cure for at least 28 days.
2 · Apply
- Shake or stir well before use.
- Apply the first coat generously by roller or brush, working into the surface.
- Apply the second coat after 4 hours, crosswise to the first.
- Do not apply if rain is expected within 12 hours.
- Clean tools with water immediately after use.
- Water based, low odour
- Use in a ventilated area
- Keep away from children
- Store between 5°C and 40°C
Store in a cool, dry, shaded place between 5°C and 40°C with the lid tightly closed. Keep out of reach of children. Do not pour into drains. Ensure good ventilation while painting.
The information on this page is given in good faith based on our testing and experience. As conditions of use are beyond our control, no warranty is implied. Premium Asian Coating Systems reserves the right to update this information without notice.
Works well with
Complete the system.