PACS Specialty · Waterproofing
Urban Glaze
U3-technology sealant that waterproofs, hardens and heat-guards.
- Coverage6 – 8 m²/L
- Touch dry1 hour
- Recoat4 hours
- Coats2
- ThinningReady to use
- FinishClear to milky liquid
01Product description
Wallman Urban Glaze is a clear protective waterproofing sealant built on U3 technology. It penetrates and seals mineral surfaces, adding water-proofing, chemical resistance, heat guard from sun rays and surface hardness, with anti-fungal and anti-bacterial protection.
Recommended for
- Roofs
- Terraces
- Exterior walls
- Concrete and cement floors
02Key features
- Waterproof sealant
- Heat guard from sun rays
- Chemical resistance
- Increases surface hardness and toughness
- Anti-fungal and anti-bacterial protection
03Performance
Drying time at 25°C
Apply with
- Brush
- Roller
- Spray
TDS-PC-UG
Scan for latest version
04Technical data
| Product type | Clear waterproofing sealant (U3 technology) |
|---|---|
| Appearance | Clear to milky liquid, dries transparent |
| Specific gravity | 1.00 – 1.05 kg/L |
| Theoretical coverage | 6 – 8 m²/L per coat, surface dependent |
| Touch dry | 1 hour |
| Recoat | 4 hours |
| Full cure | 7 days |
| Thinning | Ready to use |
| Application | Roller, brush, low-pressure spray |
| Recommended coats | 2 |
| Shelf life | 12 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
05How to apply
Surface preparation
- Surface must be clean, dry, sound and free of dust, moss, oil and loose material.
- Repair cracks and holes with SBR Waterproof cement slurry and allow to cure.
- New concrete or plaster should cure for at least 28 days.
Application
- Shake or stir well before use.
- Apply the first coat generously by roller or brush, working into the surface.
- Apply the second coat after 4 hours, crosswise to the first.
- Do not apply if rain is expected within 12 hours.
- Clean tools with water immediately after use.
06Storage, health & safety
- Water based, low odour
- Use in a ventilated area
- Keep away from children
- Store between 5°C and 40°C
Store in a cool, dry, shaded place between 5°C and 40°C with the lid tightly closed. Keep out of reach of children. Do not pour into drains. Ensure good ventilation while painting.
The information in this data sheet is given in good faith, based on laboratory testing and practical experience. As conditions of use are beyond our control, no warranty is implied as to results. Premium Asian Coating Systems reserves the right to change this information without notice; please check that you have the latest issue.