Wallman · Putty & primers
Premium Wall Putty
Ready-mix putty for a glass-smooth base.
- Coverage1.2 – 1.5 m²/kg
- Touch dry3 – 4 hours
- RecoatAfter 4 – 6 hours
- Coats2 thin coats
- ThinningReady to use
- FinishSmooth white paste
01Product description
Wallman Premium Wall Putty is a ready-to-use acrylic putty that fills pores, hairline cracks and dents, and levels the wall to a velvety smooth base. It sands easily and gives topcoats a flawless surface to sit on.
Recommended for
- Interior plaster and concrete walls
- Before primer
02Key features
- Ready to use — no mixing
- Fills pores, dents and hairlines
- Easy to sand to a smooth finish
- Good whiteness and adhesion
- Reduces paint consumption
03Performance
Drying time at 25°C
Apply with
- Brush
- Roller
- Spray
- Putty knife
TDS-WM-PWP
Scan for latest version
04Technical data
| Product type | Acrylic ready-mix wall putty |
|---|---|
| Appearance | Smooth white paste |
| Specific gravity | 1.70 – 1.80 kg/L |
| Theoretical coverage | 1.2 – 1.5 m²/kg per thin coat |
| Drying between coats | 3 – 4 hours |
| Sanding | After 4 – 6 hours |
| Thinning | Ready to use; up to 5% water if needed |
| Application | Putty knife / spatula |
| Recommended coats | 2 thin coats |
| Shelf life | 12 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
05How to apply
Surface preparation
- Wall must be clean, dry and free of dust, oil and loose material.
- Dampen very dry or porous plaster slightly before application.
- Remove any loose old paint and sand glossy surfaces.
Application
- Stir well before use.
- Apply a thin first coat with a putty knife across the wall.
- After 3 – 4 hours apply a second thin coat at right angles.
- When dry, sand with fine emery paper and dust off.
- Follow with a coat of primer before painting.
06Storage, health & safety
- Water based, low odour
- Use in a ventilated area
- Keep away from children
- Store between 5°C and 40°C
Store in a cool, dry, shaded place between 5°C and 40°C with the lid tightly closed. Keep out of reach of children. Do not pour into drains. Ensure good ventilation while painting.
The information in this data sheet is given in good faith, based on laboratory testing and practical experience. As conditions of use are beyond our control, no warranty is implied as to results. Premium Asian Coating Systems reserves the right to change this information without notice; please check that you have the latest issue.