Wallman
Water Based Wall Primer
Flat wall primer
Details
Premium Wall Putty
Ready-mix putty for a glass-smooth base.
- Coverage1.2 – 1.5 m²/kg
- Touch dry3 – 4 hours
- RecoatAfter 4 – 6 hours
- Coats2 thin coats
Overview
Made for putty & primers.
Wallman Premium Wall Putty is a ready-to-use acrylic putty that fills pores, hairline cracks and dents, and levels the wall to a velvety smooth base. It sands easily and gives topcoats a flawless surface to sit on.
- Interior plaster and concrete walls
- Before primer
Key features
- Ready to use — no mixing
- Fills pores, dents and hairlines
- Easy to sand to a smooth finish
- Good whiteness and adhesion
- Reduces paint consumption
Performance
How it performs.
Drying time at 25°C
Coverage per coat
1.2–1.5m²/kg
≈ 13–16 sq ft per kg
| Drum 20 kg | 24–30 m² |
|---|---|
| Gallon 5 kg | 6–8 m² |
Apply with
- Brush
- Roller
- Spray
- Putty knife
Recommended system · Interior walls
- 1Wallman Premium Wall PuttyLevel the surface
- 2Wallman Water Based Wall PrimerSeal and bind — water-based
- 3
Wallman Premium Plastic Emulsion × 2Colour and protection
Technical data
The specifications.
| Product type | Acrylic ready-mix wall putty |
|---|---|
| Appearance | Smooth white paste |
| Specific gravity | 1.70 – 1.80 kg/L |
| Theoretical coverage | 1.2 – 1.5 m²/kg per thin coat |
| Drying between coats | 3 – 4 hours |
| Sanding | After 4 – 6 hours |
| Thinning | Ready to use; up to 5% water if needed |
| Application | Putty knife / spatula |
| Recommended coats | 2 thin coats |
| Shelf life | 12 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
Download
The full technical data sheet as a print-ready A4 PDF — specifications, application, system and shade card.
Open datasheetPack sizes
Drum · Gallon · Quarter
How to apply
For the best finish.
1 · Prepare the surface
- Wall must be clean, dry and free of dust, oil and loose material.
- Dampen very dry or porous plaster slightly before application.
- Remove any loose old paint and sand glossy surfaces.
2 · Apply
- Stir well before use.
- Apply a thin first coat with a putty knife across the wall.
- After 3 – 4 hours apply a second thin coat at right angles.
- When dry, sand with fine emery paper and dust off.
- Follow with a coat of primer before painting.
- Water based, low odour
- Use in a ventilated area
- Keep away from children
- Store between 5°C and 40°C
Store in a cool, dry, shaded place between 5°C and 40°C with the lid tightly closed. Keep out of reach of children. Do not pour into drains. Ensure good ventilation while painting.
The information on this page is given in good faith based on our testing and experience. As conditions of use are beyond our control, no warranty is implied. Premium Asian Coating Systems reserves the right to update this information without notice.
