Wallman
Premium Wall Putty
Velvety smooth
Details
Synthetic Matt Enamel
A smooth, washable matt enamel for interior walls.
- Coverage12 – 14 m²/L
- Touch dry1 – 2 hours
- Recoat12 – 16 hours
- Coats2
Overview
Made for interior walls.
Wallman Synthetic Matt Enamel is an alkyd-based enamel that dries to a smooth, elegant matt finish with the toughness of an oil paint. Its hard-wearing film resists stains, damp and steam, and wipes clean without polishing, so walls keep their even, non-reflective look for years. Use it on interior walls and ceilings, kitchens, bathrooms and corridors, and on doors, windows and woodwork for a matching matt finish throughout the home.
- Interior walls
- Kitchens
- Bathrooms
- Corridors
- Doors and woodwork
Key features
- Smooth, non-reflective matt finish
- Washable – wipes clean without polishing
- Hard-wearing alkyd film
- Resists damp, steam and fungus
- Excellent hiding and flow
- For walls, wood and metal
Performance
How it performs.
Drying time at 25°C
Coverage per coat
12–14m²/L
≈ 129–151 sq ft per litre
| Drum 18.2 L | 218–255 m² |
|---|---|
| Gallon 3.64 L | 44–51 m² |
| Quarter 0.91 L | 11–13 m² |
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
Recommended system · Interior walls
- 1Wallman Premium Wall PuttyLevel the surface
- 2
Wallman Synthetic Wall Primer SealerSeal and bind — oil-based - 3Wallman Synthetic Matt Enamel × 2Colour and protection
Shade card
47 ready-mixed shades.
Apple White
Shade 4001
Screen colours are a guide. Check the printed shade card at your dealer before buying.
Technical data
The specifications.
| Product type | Alkyd synthetic matt enamel |
|---|---|
| Finish | Smooth matt |
| Gloss (60°) | Below 8 GU |
| Volume solids | 46 ± 2% |
| Specific gravity | 1.35 – 1.45 kg/L (shade dependent) |
| Dry film thickness | 30 – 35 µm per coat |
| Theoretical coverage | 12 – 14 m²/L per coat (129 – 151 sq ft) |
| Touch dry | 1 – 2 hours |
| Hard dry | 12 hours |
| Recoat | 12 – 16 hours |
| Full cure | 7 days |
| Thinner | Mineral turpentine, up to 10% |
| Application | Brush, roller, spray |
| Recommended coats | 2 |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
Download
The full technical data sheet as a print-ready A4 PDF — specifications, application, system and shade card.
Open datasheetPack sizes
Drum · Gallon · Quarter
How to apply
For the best finish.
1 · Prepare the surface
- Surface must be clean, dry and sound, free of dust, grease, loose paint and efflorescence.
- New plaster should cure for at least 28 days before painting.
- Fill cracks and dents with Wallman Premium Wall Putty, allow to dry and sand smooth.
- Apply one coat of Wallman Synthetic Wall Primer Sealer and let it dry overnight.
- On old painted walls, wash off dirt and grease and lightly sand glossy areas for good adhesion.
2 · Apply
- Stir thoroughly before use.
- Thin with mineral turpentine only if needed, up to 10%.
- Apply thin, even coats by brush, roller or spray.
- Allow 12 – 16 hours between coats.
- Keep the room ventilated while painting and drying.
- Clean tools with mineral turpentine.
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information on this page is given in good faith based on our testing and experience. As conditions of use are beyond our control, no warranty is implied. Premium Asian Coating Systems reserves the right to update this information without notice.