Wallman
Premium Wall Putty
Velvety smooth
Details
Synthetic Wall Primer Sealer
Oil-based sealer that locks out alkali, damp and stains.
- Coverage10 – 12 m²/L
- Touch dry1 – 2 hours
- Coats1
- ThinningMineral turpentine
Overview
Made for putty & primers.
Wallman Synthetic Wall Primer Sealer is a solvent-based alkyd sealer that soaks into plaster and cement and binds it into a hard, sealed base. It blocks alkali from new cement and helps stop water marks, smoke and old stains from showing through, so emulsions and enamels dry to an even, long-lasting colour. Use it on new or patchy walls, inside and out — especially under Wallman Synthetic Matt Enamel and Weather Defence.
- New plaster
- Cement and patchy or stained walls — interior & exterior
Key features
- Deep-penetrating alkyd sealer
- Blocks alkali from new cement
- Helps stop stains and water marks showing through
- Excellent adhesion for emulsions and enamels
- Hard, even base that saves topcoat
- For interior and exterior walls
Performance
How it performs.
Drying time at 25°C
Coverage per coat
10–12m²/L
≈ 108–129 sq ft per litre
| Drum 18.2 L | 182–218 m² |
|---|---|
| Gallon 3.64 L | 36–44 m² |
| Quarter 0.91 L | 9–11 m² |
Sheen level
- Matt
- Low sheen
- Silk
- Semi-gloss
- Gloss
Apply with
- Brush
- Roller
- Spray
Recommended system · Walls · oil-based enamels
- 1Wallman Premium Wall PuttyLevel the surface
- 2Wallman Synthetic Wall Primer SealerSeal and bind
- 3
Wallman Synthetic Matt Enamel × 2Washable enamel finish
Technical data
The specifications.
| Product type | Alkyd (synthetic) wall primer sealer |
|---|---|
| Finish | Flat |
| Colour | White |
| Volume solids | 35 ± 2% |
| Specific gravity | 1.20 – 1.30 kg/L |
| Theoretical coverage | 10 – 12 m²/L per coat (108 – 130 sq ft) |
| Touch dry | 1 – 2 hours |
| Topcoat after | 8 – 12 hours (overnight recommended) |
| Thinner | Mineral turpentine, 10 – 20% |
| Application | Brush, roller, spray |
| Recommended coats | 1 (2 on very porous or stained walls) |
| Shelf life | 24 months, unopened |
Typical values at 25°C and 50% relative humidity. Practical coverage depends on surface texture, porosity and application method.
Download
The full technical data sheet as a print-ready A4 PDF — specifications, application, system and shade card.
Open datasheetPack sizes
Drum · Gallon · Quarter
How to apply
For the best finish.
1 · Prepare the surface
- Surface must be completely dry, clean and sound, free of dust, grease, loose paint and efflorescence.
- New plaster should cure for at least 28 days before sealing.
- Fill cracks and dents with Wallman Premium Wall Putty, allow to dry and sand smooth.
- Brush off all sanding dust.
- Treat fungus or algae and let the wall dry fully before sealing.
- Do not apply on damp walls — fix the source of seepage first.
2 · Apply
- Stir thoroughly before use.
- Thin with mineral turpentine, 10 – 20%, according to surface porosity.
- Apply one even coat by brush, roller or spray; two coats on very porous or stained walls.
- Allow 8 – 12 hours, preferably overnight, before the topcoat.
- Finish with Wallman emulsions, Weather Defence or Synthetic Matt Enamel.
- Keep the area ventilated while painting and clean tools with mineral turpentine.
- Flammable — no naked flames
- Ventilate well while painting
- Avoid skin contact
- Keep away from children
Store in a cool, dry, well-ventilated place away from heat, sparks and open flame, with the lid tightly closed. Flammable — do not smoke while painting. Avoid inhaling vapour; use in ventilated areas. Keep out of reach of children.
The information on this page is given in good faith based on our testing and experience. As conditions of use are beyond our control, no warranty is implied. Premium Asian Coating Systems reserves the right to update this information without notice.